Signal Relays
The relays shown here are for signal or telecom applications where low loads need to be switched. For requirements above 3A please refer to the general purpose relays shown elsewhere on this site. There are typically 10 standard voltages to choose from and variants with both sensitive and ultra-sensitive coils. Pull-in times are very short.
| Product | Description | ||
|---|---|---|---|
 |
462kb | 842 Series 3A/120VAC; 3A/28VDC SPDT 15.7mmx10.9mmx12mm |
UL & CUL approvals 200mW DC coil Flux tight & sealed washable versions available -25 +70°C |
 |
508kb | 502 Series 0.5A/125VAC; 1A/24VDC DPDT 20mmx10.1mmx11.5mm |
UL & CSA approvals 3…12VDC/150mW; 24VDC/200mW; 48VDC/300mW Sealed washable -25 +70°C |
 |
549kb | 702 Series 0.5A/125VAC; 1A/30VDC DPDT 14mmx9mmx5mm |
UL & CSA approvals 3…12VDC/140mW; 24VDC/200mW Sealed washable Monostable & bistable versions available PCB & SMD terminals available -40 +70°C |
 |
554kb | 902 Series 0.5/125VAC; 2A/30VDC DPDT 14.8mmx7.3mmx9.2mm |
UL & CSA approvals 4.5…12VDC/140mW; 24VDC/200mW Monostable & bistable versions available Sealed washable PCB & SMD terminals available -40 +85°C |