This is a list showing the exact part numbers used for Kuhnke panel
builder relays, sockets and modules. These products are normally available from
stock, held in the UK. For a printable version in PDF format,
please click here(196kb).
| A range of 8A/12A/16A single pole and two pole relays,
with sockets, modules and clips ordered seperately. Ideal interface relays,
used where enclosure space is at a premium.
Standard coils 12VDC/24VDC/24VAC/115VAC/230VAC.
Other coil voltages are available. |
| |
 |
171.G1.12VDC |
Single pole change over 12A rated contacts 12VDC |
| 171.G1.24VDC |
Single pole change over 12A rated contacts 24VDC |
| 171.G1.24VAC |
Single pole change over 12A rated contacts 24VAC |
| 171.G1.115VAC |
Single pole change over 12A rated contacts 115VAC |
| 171.G1.230VAC |
Single pole change over 12A rated contacts 230VAC |
 |
Z318.02 |
Safe separation base for 171.G1 relays. Modules supported |
 |
Z438 |
Rapid eject and retaining clip for 171 relays. |
 |
171.G2.12VDC |
Double pole change over 8A rated contacts 12VDC |
| 171.G2.24VDC |
Double pole change over 8A rated contacts 24VDC |
| 171.G2.24VAC |
Double pole change over 8A rated contacts 24VAC |
| 171.G2.115VAC |
Double pole change over 8A rated contacts 115VAC |
| 171.G2.2130VAC |
Double pole change over 8A rated contacts 230VAC |
 |
171.P1.12VDC |
Single pole change over 16A rated contacts 12VDC |
| 171.P1.24VDC |
Single pole change over 16A rated contacts 24VDC |
| 171.P1.24VAC |
Single pole change over 16A rated contacts 24VAC |
| 171.P1.115VAC |
Single pole change over 16A rated contacts 115VAC |
| 171.P1.230VAC |
Single pole change over 16A rated contacts 230VAC |
 |
Z315.02 |
Safe separation base for 171.G2 / 171.P1 relays. Modules supported |
 |
Z319.02 |
Base for 171.G2 / 171.P1 relays. Modules supported |
|
Z438 |
Rapid eject and retaining clip for 171 relays. |
| The classic 14 pin panel builder relay. This robust 4 c/o
product switches 30mA - 10A. Push to test, override locking lever and coil
LED are standard. Coils 12VDC/24VDC/24VAC/115VAC/230VAC |
| |
 |
114.A4.24VAC1L |
4 pole change over 10A rated contacts 24VAC with LED |
| 114.A4.115VAC1L |
4 pole change over 10A rated contacts 115VAC with LED |
| 114.A4.230VAC1L |
4 pole change over 10A rated contacts 230VAC with LED |
| 114.A4.12VDC1L |
4 pole change over 10A rated contacts 12VDC with LED |
| 114.A4.24VDC1L |
4 pole change over 10A rated contacts 24VDC with LED |
 |
Z368.02 |
Base for 114 relays. Modules supported |
 |
Z388.02 |
Safe seperation base for 114 relays. Modules supported |
8 pin and 11 pin (round pin or 'octal') 10A relays for 2 c/o or 3 c/o
applications. Push to test, override locking lever and coil LED are standard. Coils
24VDC/24VAC/115VAC/230VAC
|
| |
 |
UF2.24VAC1L |
2 pole change over 10A rated contacts 24VAC with LED |
| UF2.115VAC1L |
2 pole change over 10A rated contacts 115VAC with LED |
| UF2.230VAC1L |
2 pole change over 10A rated contacts 230VAC with LED |
| UF2.24VDC1L |
2 pole change over 10A rated contacts 24VDC with LED |
| UF3.24VAC1L |
3 pole change over 10A rated contacts 24VAC with LED |
| UF3.115VAC1L |
3 pole change over 10A rated contacts 115VAC with LED |
| UF3.230VAC1L |
3 pole change over 10A rated contacts 230VAC with LED |
| UF3.24VDC1L |
3 pole change over 10A rated contacts 24VDC with LED |
 |
Z392 |
Standard base for UF2 relays, modules are not supported |
 |
Z393 |
Standard base for UF3 relays, modules are not supported |
| Plug in coil indicator (LED or neon) and protection (diode
or varistor) modules which fit into the sockets Z315.02, Z318.02, Z366.02,
Z68.02. These are particulary popular with the 171 series low
profile relays. Fit module into socket, then lock into place with the relay
and secure with the clip. |
| |
 |
Z318.51 |
Protection/luminous diode module for 6-24VDC |
| Z318.52 |
LED module for 6-24VAC/DC |
| Z318.53 |
Protection diode |
| Z318.54 |
Varistor module for 24VDC |
| Z318.55 |
Varistor module for 230VAC |
| Z318.58 |
LED module for 110/230VAC |
